You are here


cworbc.org.au

bathurst evocities round 3

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Just a heads up for those not in the know make sure you bring plenty of spares tubes patches latex stans etc as the Bathurst track is cat head Central... one trip off the track and it its all over
I had 15 catheads in my tyre after a brief off on one of the corners. They all caused air to come out upon removal and I run tubeless with caffelattex

You have been warned

Great track other wise hard to get used to the slippery decomposed granite surface ..less tyre pressure in front helps
Cheers

converting to 1x11

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

OK so I know this has been discussed before many times but here goes anyway
I want to convert my 2011 specialized epic comp carbon 29er to a 1x11
My question is should I stick to sram components or go to shimano
I basically want to keep my xo truvativ carbon cranks if possible and get a narrow wide up front probably 32-34T
Was thinking going SRAM xx1 rear derailleur and cassette or shimano xtr not sure about front shifter yet

Any advice on gear would be much appreciated as this is all new to me
Paul

Webscorer reviews?

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

I'm thinking our club (CWORBC) should get webscorer (http://www.webscorer.com/) and buy an android tablet to use it on.

Has anyone used it? On which device(s)?

We'd be mainly using it for multi lap time limited events (ie. most laps wins).

I think Lithgow use it? Do you have any problems with it?

Thursday Race Results 9.10.2014

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

See results attached

bb size?

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Hi, looking at converting my 2014 giant xtc advanced 29er 1 to 1x10, I want to run some new race face cranks. What bb do
I have. I think I need 92?

Surly Fat Bike

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

I think I want a Surly Pugsly or Moonlander, who has experience with these bikes and wants to share? I have a Rat Ride and love it, also a 1x1 frame gathering dust that has a pile of parts lying around it that need bolting on (standard 29 rims).

new ride

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Thinking its time for a new ride, and as im only new to this, would like some input please, 29 ht i think is the way to go, like the look of carves but not sure working on a budget under 2000.00

Bike Buller

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.
Below is a preview, click to read the full post

http://www.rapidascent.com.au/BikeBuller/default...

Is anyone from anywhere near Orange going to this?

I'm keen to go though would like to share travel.

There's a mate from Melbourne going who told me it is a fantastic event.

Elixer Brakes

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

G'day

Can someone tell me how to open up the brake pads on my Elixer 7 Brakes? The gap has closed up and the pads are rubbing on the disc while I am riding.

Agogo carbon frames

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Has anyone heard anything about these pretty looking agogo 29er carbon frames?

Curious to hear from anyone who has seen or tried them.

Thanks!
Adam

Best Mountain Bike